[Dec 15, 2025] New CTS-I Exam Dumps with High Passing Rate
Get CTS-I Braindumps & CTS-I Real Exam Questions
NEW QUESTION # 192
As light increases, _____ kicks in and adjusts until it has closed to its maximum.
- A. Depth-of-field
- B. Auto gain
- C. Auto-shutter
- D. The auto-iris
Answer: D
NEW QUESTION # 193
If sound energy is absorbed by the materials in the space, it has _____.
- A. Broken
- B. been converted to heat
- C. disappeared
- D. stopped existing
Answer: B
NEW QUESTION # 194
When mounting a 75 lb projector with a 15 lbs mount, the substructure should be able to support a minimum of?
- A. 270 lbs
- B. 90 lbs
- C. 180 lbs
- D. 450 lbs
Answer: D
NEW QUESTION # 195
"If you drill through a cable, the cable will snap and tear off the outside of the building. Anything in its way is in danger of damage or serious injury." What sort of building construction material poses this kind of risk when mounting equipment?
- A. Solid concrete
- B. Post-tension construction
- C. I-beams
- D. Poured pan concrete
Answer: B
NEW QUESTION # 196
Which of the following are associated with sound pressure levels? (Choose all that apply.)
- A. Is the ultimate method for quantifying background noise levels
- B. Can most accurately be measured with a Class 1 precision SPL meter
- C. Is typically measured in decibels (dB SPL)
- D. Eliminates distortion in speech reinforcement
Answer: B,C
NEW QUESTION # 197
On which type of cable should you avoid using cable lubricants?
- A. Coaxial cable
- B. CAT5e cable
- C. Fiber optic cable
- D. Shielded cable
Answer: C
NEW QUESTION # 198
Which of the following is the best definition of aspect ratio?
- A. the ratio of image width to height
- B. the ratio of image distance to height
- C. the ratio of image depth to distance
- D. the ratio of image width to length
Answer: A
NEW QUESTION # 199
Rear projection is a transmissive system that _____.
- A. can allow a presenter to block all or part of the image
- B. handles ambient light issues more poorly than front screen projection
- C. allows light to pass through a translucent screen toward the viewer
- D. requires little space for installation
Answer: C
NEW QUESTION # 200
What type of drill bit should you use when drilling a pilot hole into plastic?
- A. A sheet metal bit
- B. A masonry drill bit
- C. A high-speed metal drill bit designed for wood
- D. Self-taping screws
Answer: C
NEW QUESTION # 201
Which of the following describes the number of cycles in a given time period?
- A. frequency
- B. Magnitude
- C. wavelength
- D. amplitude
Answer: A
NEW QUESTION # 202
Which of the following is an unambiguous, technical term?
- A. Individual branch circuit
- B. Clean power
- C. Dedicated ground
- D. Quiet ground
Answer: A
NEW QUESTION # 203
Heat dissipated by equipment in an AV rack is measured in:
Response:
- A. Watts
- B. Coulombs
- C. Degrees
- D. BTU/H
Answer: D
NEW QUESTION # 204
When working with electrical systems, what should you do if two codes have conflicting requirements?
- A. Follow the guidelines from the most restrictive code
- B. Follow the guidelines from the most lenient code
- C. Consult the NEC handbook and do only what it says
- D. Ignore both of the codes and do the installation in a way that makes sense to you
Answer: A
NEW QUESTION # 205
The total impedance of a circuit wired in series is represented by the formula _____.
- A. ZT =1 / (Z1 + Z2 + Z3 ...+ ZN)
- B. ZT =1 / [(1 / Z1) + (1 / Z2) + (1 / Z3) ... + (1 / ZN)]
- C. ZT = Z1 + Z2 + Z3 ... + ZN
- D. P = I * E
Answer: C
NEW QUESTION # 206
HDCP is capable of working over which of the following interfaces?
Select all that apply.
Response:
- A. HDBaseT
- B. MHL
- C. DisplayPort
- D. HDMI
Answer: A,B,C,D
NEW QUESTION # 207
Why is it better to test control systems in the shop?
Select all that apply.
Response:
- A. It allows time for longer breaks.
- B. It prevents customers from asking questions.
- C. It may provide better access to help from internal teams.
- D. It allows more time to fix problems.
Answer: C,D
NEW QUESTION # 208
What is the total impedance (rounded) of 10 loudspeakers tapped at 7.5w each in a 70v, distributed system?
Response:
- A. 8 ohms
- B. 128 ohms
- C. 80 ohms
- D. 65 ohms
Answer: D
NEW QUESTION # 209
Which adjustment on a video wall processor will compensate for the borders between the individual displays?
- A. Frame rate reduction
- B. Overscan
- C. EDID
- D. Mullion adjustment
Answer: D
NEW QUESTION # 210
The best practice for mounting equipment in a rack is to:
- A. Verify that the holes of the rear mounting rails are 1 inch (2.5 cm) higher than front rails.
- B. Remove all clip nuts from the mounting rail to secure them to gear first
- C. Mark RUs beside the mounting rail with a utility knife.
- D. Lay the rack on its back on top of padding.
Answer: D
NEW QUESTION # 211
The original LCD monitor specified on the project was not available. The model used to replace it has a lower native resolution than the original monitor. What device could be used to keep the EDID table from now calculating the EDID table to a lower resolution for the whole system?
Response:
- A. Scaler
- B. EDID emulator
- C. Transcoder
- D. Scan Converter
Answer: A
NEW QUESTION # 212
The connector pictured below is known as:
Response:
- A. Ancillary dimpled solder connection
- B. Direct connection termination
- C. Insulation displacement
- D. Captive screw compression termination
Answer: D
NEW QUESTION # 213
During the handshake process, bytes from the EDID table are sent to _____.
Response:
- A. sink devices
- B. source devices
Answer: B
NEW QUESTION # 214
A rack elevation diagram depicts:
- A. Cable and connecter termination procedures.
- B. Where on a wall the rack should be mounted.
- C. The location of equipment within a rack.
- D. The signal flow of a system.
Answer: C
NEW QUESTION # 215
......
CTS-I Dumps To Pass AVIXA Exam in 24 Hours - PDFDumps: https://actualtorrent.pdfdumps.com/CTS-I-valid-exam.html